Eland Cables Cable Information (1)

N2XSEY XLPE PVC - 6/10 (12)kV Cable

N2XSEY cables are three-core class 2 stranded copper medium voltage cables manufactured in accordance with IEC 60502-2, European Standard VDE 0276 Part 620, and HD620 standard. They have a cross-linked polyethylene (PE) insulation, copper wire screen, and a polyvinyl chloride (PVC) oversheath, which makes them particular easy to lay even in difficult line guideways and in temperatures as low as -5oC. As with all MV cables, there is an inner and outer layer of semi-conductive material to smooth out the internal discharges and maintain operational reliability.

N2XSEY cables are widely used in the building and construction, renewable energy, and power transmission industries where the cables can be laid directly into the ground or cable ducts.

This range of Medium Voltage cables is compliant with VDE 0482-332-1-2 and IEC 60332-1, being flame retardant and self-extinguishing. The red oversheath is not UV resistant, preventing installation of the cable in direct sunlight. Should UV resistance be required, please discuss directly with the team at point of quotation and this can be specified.

N2XSEY cable voltage rating

The three-core N2XSEY cable is most commonly requested in a voltage rating of 6/10kV but higher voltages are available on request and N2XSEY cable datasheets can be provided. Single core variants of this cable - known by the designation N2XSY - have datasheets available in the following voltages: 
- 6/10kV
- 12/20kV
- 18/30kV

FastQuote Logo

Your tailored quote direct to your inbox

Your basket is currently empty

Go back

More information

N2XSEY cable specification 

Selecting and specifying N2XSEY cables will be determined by the system design, the installation parameters, and the environmental conditions the cable will face during its lifetime. The technical datasheet will have dimensional and electrical characteristics, but additional support including cable sizing can be provided by our technical team.

Consideration may also be given to the aluminium alternative - NA2XSEY - on projects where space is not a constraint given the larger overall diameter of aluminium cables with the same voltage rating.

Eland Cables is a leader in the supply of medium voltage cables manufactured to various international standards including N2XSEY and NA2XSEY. Our international team can be contacted by email international@elandcables.com or by telephone on +44 (0)20 7241 8740 for expert technical support with cable selection and to arrange delivery logistics to your site.

Construction Table

  N2XSEY Cable CS N2XSEY XLPE PVC - 6/10 (12)kV Cable
VOLTAGE

6/10 (12)kV

CONDUCTOR

Class 2 Stranded Copper

INNER LAYER

Semi-Conductive Material

INSULATION

XLPE (Cross-Linked Polyethylene)

OUTER LAYER

Semi-Conductive Material and Tape

SCREEN

Copper Wires (cores individually screened)

OUTER SHEATH

PVC (Polyvinyl Chloride)

N2XSEY XLPE PVC - 6/10 (12)kV Cable

1 product(s)

YOUR CABLE OPTIONS

Use the FastQuote filters to find the exact cable specifications you need.

Need a bespoke solution? Learn more about customised cables.

Reset

Product name Part No Cores Nominal cross-sectional area (mm²) Sheath colour Length (m)  
N2XSEY XLPE PVC - 6/10 (12)kV CableA9X10KV3035335Red
N2XSEY XLPE PVC - 6/10 (12)kV CableA9X10KV3050350Red
N2XSEY XLPE PVC - 6/10 (12)kV CableA9X10KV3070370Red
N2XSEY XLPE PVC - 6/10 (12)kV CableA9X10KV3095395Red
N2XSEY XLPE PVC - 6/10 (12)kV CableA9X10KV31203120Red
N2XSEY XLPE PVC - 6/10 (12)kV CableA9X10KV31503150Red
N2XSEY XLPE PVC - 6/10 (12)kV CableA9X10KV31853185Red
N2XSEY XLPE PVC - 6/10 (12)kV CableA9X10KV32403240Red