Aluminium Turbine Tower Cables

Key Features: Aluminium Turbine Tower Cables

Application: Low voltage power distribution cables.
Suitability: Permanent routing of power inside wind turbine towers.
Standards & Voltage Rating: IEC 60502-1. Flame retardant. Low Smoke Zero Halogen. 0.6/1kV.
Construction: Class 2 Aluminium conductor, Hard Ethylene Propylene Rubber (HEPR) or Ethylene Propylene Rubber (EPR) insulation, and Polyolefin (PO) type HXM1 or Cross-linked Ethylene-Vinyl Acetate (XL-EVA) outer sheath. XL-EVA cable also has a Tinned wire copper braid (TCWB) screen.
Details: Single and multi-core configurations. Withstands environmental challenges and mechanical stresses. Oil, ozone and UV Resistant.

Eland Cables is a leading global supplier of power, instrumentation and data cables for critical infrastructure and electrification. Our complete cable solutions are underpinned by technical expertise and our Cable Lab^®, ensures rigorous compliance. Contact our team to discuss your requirements.

Jump To:

What are Aluminium Turbine Tower Cables?
HEPR-PO and XL-EVA-LSZH cable specification
Aluminium Turbine Tower Cable Sizes
Datasheets

Our Aluminium Turbine Tower cables are low voltage power distribution cables with a rated voltage of 0.6/1kV. They are designed to power the motors and mechanisms of wind turbines. These applications require cables capable of withstanding the environmental challenges and mechanical stresses they are subject to.

Our Aluminium Turbine Tower cables are part of our wider portfolio of wind turbine and windfarm cables, including our Copper Conductor Torsion Resistant Power, S-3GSHCOEU & S3GSHXOEU cables, and our wider Medium Voltage and Low Voltage power, control and data cables for safe and remote operations.

The LSZH sheathing on these Turbine Tower power cables provides durable protection suited to internal installations within the body or nacelle of the turbine. The Aluminium conductors make them lightweight.

The outer sheathing material depends on the cable type: the HEPR-PO 0.6/1kV cable has a hard Ethylene Propylene Rubber (EPR) insulation, a rubber inner sheath, and a Polyolefin outer sheath.

The XL-EVA-LSZH cable (voltage rating 0.6/1kV) has an EPR insulation layer but a Cross-linked Ethylene Vinyl Acetate sheathing (XL-EVA).

In both cases, the cable sheathing materials offer good chemical resistance, thermal and mechanical properties, and in these compounds are halogen free and flame retardant.

The XL-EVA-LSZH 1kV cable is also constructed with a tinned copper wire braid metallic screen to limit electromagnetic interference and signal interruption.

Our HEPR-PO-1kV cable is available in sizes 1x50mm to 1x400mm², as well as in 3x150mm² and 4x150mm² (as commonly requested for windfarm projects). Our XL-EVA-LSZH 1kV cable is provided as 1x150mm² to 1x400mm² as standard.

The technical datasheets will provide information suited to most installations, covering both cable sizes, weights and electrical characteristics. Where additional sizes are required, please speak to a member of the team for more information.

Further specification support for these Aluminium Turbine cables for Renewable energy projects, is provided by our technical team, available on request.

More information